Masterpiece specialty tooling for Dental Bars

AluminiumTitanium Nitride (AlTiN) Coatied Utilizing the Physical Vapor Deposition (PVD) process

A formed layer of aluminum oxide gives this tool better life in high heat applications. This coating is primarily selected for carbide tooling where little to no coolant is being used.

This coating holds its hardness at higher temperatures due to a layer of aluminum oxide that forms between the tool and the cutting chip. This layer transfers heat away from the tool and into the part or chip.

Due to the excellent heat insulation between chips and tools, AlTiN coatings are the most used coatings for modern high performance cutting.

• Higher operational temperature range (T>800C)
• Great dry machining performance (minimum use of lubricants)
• Good for machining steel (in the range of 50~55 HRC)

Sort by
Display
per page
View as

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.5xL14x50 AlCrN Coated Drill.

TLM6N_M15DR-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.5xL14x50 AlCrN Coated Drill.
$79.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.5xL7x50 AlCrN Coated Flat Endmill.

TLM6N_M15FL-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.5xL7x50 AlCrN Coated Flat Endmill.
$79.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.75xL14x50 AlCrN Coated Bullnose Endmill.

TLM6N_M175BN-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D1.75xL14x50 AlCrN Coated Bullnose Endmill.
$79.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D2.0xL18x55 AlCrN Coated Flat Endmill.

TLM6N_M20FL-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool D2.0xL18x55 AlCrN Coated Flat Endmill.
$79.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool M2.0xP0.4 AlCrN Coated Tap.

TLM6N_M20TA-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal Tool M2.0xP0.4 AlCrN Coated Tap.
$110.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Metal/PMMA Deep Screw Channel Tool D1.4 AlCrN Coated T-Cutter.

TLM6N_S14TC-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Metal/PMMA Deep Screw Channel Tool D1.4 AlCrN Coated T-Cutter.
$79.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Zirconia Deep Screw Channel Tool D1.5xL21 CVD Diamond Coated Flat Endmill.

TLM6N_S15BN-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Zirconia Deep Screw Channel Tool D1.5xL21 CVD Diamond Coated Flat Endmill.
$89.00

Versamill ax314/726/200/450/500(L) Masterpiece XL Zirconia Deep Screw Channel Tool D1.6 CVD Diamond Coated T-Cutter.

TLM6N_S16TC-R
Versamill ax314/726/200/450/500(L) Masterpiece XL Zirconia Deep Screw Channel Tool D1.6 CVD Diamond Coated T-Cutter.
$79.00